Oracle 1z0-1072-22 Latest Dumps Sheet Do not excuse yourself from laziness, The questions and answers grasp of the core knowledge and key point of the 1z0-1072-22 Cert Guide - Oracle Cloud Infrastructure 2022 Architect Associate exam, which will arouse your enthusiasm of study, and you will find the exam is not as difficult as you imagine with our 1z0-1072-22 Cert Guide - Oracle Cloud Infrastructure 2022 Architect Associate exam test prep, Oracle 1z0-1072-22 Latest Dumps Sheet Ideally, practicing in an exam-like environment will help make you feel more comfortable on the day of the exam.

Defining Team Goals, LinkedIn Profile Power: Why LinkedIn Keywords Are Review 1z0-1072-22 Guide Key to Your Success, This section provides guidelines pertaining to test execution, defect tracking, and test program status tracking.

Download 1z0-1072-22 Exam Dumps

The world uses these online touchpoints to 1z0-1072-22 Latest Dumps Sheet do business, and you should be using them, too, If repair, upgrade, or replacementis necessary, most organizations utilize the 1z0-1072-22 Latest Dumps Sheet warranties built in to these products, instead of trying to do the work in-house.

Do not excuse yourself from laziness, The questions 1z0-1072-22 Cert Guide and answers grasp of the core knowledge and key point of the Oracle Cloud Infrastructure 2022 Architect Associate exam, whichwill arouse your enthusiasm of study, and you (https://www.exam4free.com/1z0-1072-22-valid-dumps.html) will find the exam is not as difficult as you imagine with our Oracle Cloud Infrastructure 2022 Architect Associate exam test prep.

Ideally, practicing in an exam-like environment will help make you feel more comfortable on the day of the exam, Isn't the 1z0-1072-22 latest practice dump a good study reference for you?

100% Pass-Rate 1z0-1072-22 Latest Dumps Sheet Help You to Get Acquainted with Real 1z0-1072-22 Exam Simulation

By actually simulating the test environment, you will have 1z0-1072-22 Latest Dumps Sheet the opportunity to learn and correct self-shortcoming in study course, You just need one or two days to practice the 1z0-1072-22 exam questions torrent and remember the key knowledge of the 1z0-1072-22 pdf study material, if you do it well you will find the exam is simple.

With the help of our 1z0-1072-22 exam preparation, you can be confident that you will pass the IT exam and get the IT certification as easy as turning over your hands.

The quality of our 1z0-1072-22 exam questions is very high and we can guarantee to you that you will have no difficulty to pass the exam, With rapid development of information technology and the fierce competence of the job market, it is a tendency for most people to getting an attractive certificate, such as 1z0-1072-22 Certification Test Dump.

Moreover, 1z0-1072-22 exam dumps of us are compiled by experienced experts of the field, and they are quite familiar with dynamics of the exam center, therefore the quality and accuracy of the 1z0-1072-22 study guide can be guaranteed.

Hot 1z0-1072-22 Latest Dumps Sheet | Latest Oracle 1z0-1072-22: Oracle Cloud Infrastructure 2022 Architect Associate 100% Pass

Owing to our high-quality 1z0-1072-22 real dump sand high passing rate, our company has been developing faster and faster and gain good reputation in the world, We go to great extent to protect your transactions and private information.

Download Oracle Cloud Infrastructure 2022 Architect Associate Exam Dumps

NEW QUESTION 37
Why are two subnets required to create a public load balancer when additional subnets are often used for back-end servers? (Choose two.)

A. Performance is higher when more subnets are used.B. Additional subnets for back-end servers allow for separate route tables for these servers.C. Routing is simpler when the load balancer is not in the same subnet as the back-end server.D. Additional subnets for back-end servers allow for separate security lists for these servers.

Answer: A,D

Explanation:
Reference:
http://www.oracle.com/webfolder/technetwork/tutorials/obe/cloud/ocis/load-balancer/load-balancer.html

 

NEW QUESTION 38
Which two statements are true about Database Cloud Service (DBCS)? (Choose two.)

A. You have full control over backup schedule and retention.B. Data Guard as a Service is offered among regions.C. You cannot manage the database as sys/sysdba.D. You can manageOracle parameters at a global system level.

Answer: A,D

Explanation:
Explanation
References:https://cloud.oracle.com/database/faq#backup
Can I set up Data Guard across Availability Domains?Yes, you can set up Data Guard in the same or different Availability Domains in a region. However, Oracle recommends that you set up your Data Guard configuration across Availability Domains.Can I set up Data Guard across Oracle Cloud Infrastructure regions?Yes, you can set up Data Guard across regions,
"but the Database Cloud Service Data Guard feature currently does not support it. " You can manually set up Data Guard across regions by logging on to your host and using DGMGRL. You must enable an internet gateway on the primary and standby DB system VCN for Data Guard to transport logs across regions. Learn more about DGMGRL.
To configure a Data Guard system across regions or between on-premises and Oracle Cloud Infrastructure DB systems, you must access the database host directly and use the DGMGRL utility.
https://docs.cloud.oracle.com/iaas/Content/Database/Tasks/usingdataguard.htm

 

NEW QUESTION 39
As the Cloud Architect for your company, you have been tasked with designing a high performance (HPC) cluster in Oracle Cloud Infrastructure (OCI). The following requirements have been defined:
* The cluster must be a minimum of three nodes, but may increase to six nodes when demand requires.
* The cluster must be resilient to any potential infrastructure failures.
* To minimize latency, all nodes must be deployed within the same availability domain (AD).
* Adding or replacing nodes within the cluster should take no more than 30 minutes.
Which twosteps should be performed to satisfy these requirements in OCI? (Choose two.)

A. Create a backup of your HPC node compute instance boot volume. Launch new compute instances directly from thebackup reduce provisioning time.B. Deploy the cluster in a single AD. Place each of the nodes in one of the three different fault domains in that AD.C. Deploy the cluster in a single AD. Place each of the nodes in a different virtual cloud network (VCN) subnet.D. Deploy the cluster in a single AD with a shared file system that leverages the file storage service (FSS).
Deploy a standby cluster in another AD and configure it to use thesame shared file system.E. Create a custom image of your HPC node compute instance. Launch new compute instances using this image to reduce provisioning time.

Answer: B,E

Explanation:
Explanation
A fault domain is a grouping of hardware and infrastructure within an availability domain. Each availability domain contains three fault domains. Fault domains provide anti-affinity: they let you distribute your instances so that the instances are not on the same physical hardware within a single availability domain. A hardware failure or Compute hardware maintenance event that affects one fault domain does not affect instances in other fault domains. In addition, thephysical hardware in a fault domain has independent and redundant power supplies, which prevents a failure in the power supply hardware within one fault domain from affecting other fault domains.
To control the placement of your compute instances, bare metal DB system instances, or virtual machine DB system instances, you can optionally specify the fault domain for a new instance or instance pool at launch time. If you don't specify the fault domain, the system selects one for you. Oracle Cloud Infrastructure makes a best-effort anti-affinity placement across different fault domains, while optimizing for available capacity in the availability domain. To change the fault domain for an instance, terminate it and launch a new instance in the preferred fault domain.
Use fault domains to do the following things:
Protect against unexpected hardware failures or power supply failures.
Protect against planned outages because of Compute hardware maintenance.

 

NEW QUESTION 40
You have created a new compartment called Production to host some production apps. You have also created users in your tenancy and added them to a Group called "production group". Your users are still unable to access the Production compartment. How can you resolve this situation?

A. Write an IAM Policy for each specific user granting them access to the production compartmentB. Write an IAM Policy for "production_group" granting it access to the production compartmentC. Your users get automatic access to all compartments, so no further action is neededD. Every compartment you create comes with a predefined set of policies, so no further action is needed

Answer: B

Explanation:
Explanation
When creating a compartment, you must provide a name for it (maximum 100 characters, including letters, numbers, periods, hyphens, and underscores) that is unique within its parent compartment. You must also provide a description, which is a non-unique, changeable description for the compartment, from 1through 400 characters.
After creating a compartment, you need to write at least one policy for it, otherwise no one can access it (except administrators or users who have permissions set at the tenancy level). When creating a compartment inside anothercompartment, the compartment inherits access permissions from compartments higher up its hierarchy.
When you create an access policy, you need to specify which compartment to attach it to. This controls who can later modify or delete the policy. Dependingon how you've designed your compartment hierarchy, you might attach it to the tenancy, a parent, or to the specific compartment itself.

 

NEW QUESTION 41
Which statement is true about Oracle Cloud Infrastructure (OCI) object storage support for server-side encryption?

A. Only the object data is encrypted and the user-defined metadata that is associated with the object is not encryptedB. You must manually decrypt the data when retrieving from OCI object storageC. You must manually enable server-side encryption for each object as you upload to OCI object storageD. Objects are automatically encrypted as they are uploaded to object storage and decrypted upon retrieval

Answer: D

Explanation:
Explanation
References:https://www.oracle.com/cloud/storage/object-storage-faq.html
- Oracle Object Storage supports server-side encryption. All data stored in Oracle Object Storage is automaticallyencrypted
- Encryption is automatically enabled for all data with no action required on the part of customers.
- Oracle encrypt both the object data and the user-defined metadata associated with the object.

 

NEW QUESTION 42
......


>>https://www.exam4free.com/1z0-1072-22-valid-dumps.html