Select Passcert 70-698 Installing and Configuring Windows 10 dumps|Passcert, so that you do not need yo waste your money and effort. And it will also allow you to have a better future. If you buy Passcert 70-698 Installing and Configuring Windows 10 dumps|Passcert, you will solve the problem of your test preparation. You will get the 70-698 Installing and Configuring Windows 10 dumps|Passcert which have the highest quality. Buy our products today, and you will open a new door, and you will get a better future.
Share some MCSA 70-698 exam questions and answers below.
In this section, you will see one or more sets of questions with the same scenario and problem. Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
You have a computer named Computer1 that runs Windows 10.
File History is turned on.
The user of Computer1 reports that previous versions of D:\Folder\File1.doc are unavailable from the Previous Versions tab.
You need to ensure that the previous versions of the file are created.
Solution: Turn on System Protection for drive D.
Does this meet the goal?
A. Yes
B. No
Answer: B
A user has a laptop named Computer 1 that runs Windows 10 and has a 64-bit application named App1 installed.
App1 fails to launch and generates an error message indicating that the application is not supported on this version of Windows.
You need to ensure that App1 can run successfully.
What should you do?
A. Create a package that includes App1 by using the Windows Imaging and Configuration Designer (Windows ICD).
B. Create a fix in the Compatibility Administrator.
C. Run App1 in the Standard User Analyzer (SUA).
D. Use the Application Compatibility Manager (ACM) to create aninventory package.
Answer: B
You have a computer that has a local printer.
You need to share the printer.
Which two tools can you use to achieve the goal? Each correct answer presents a complete solution.
A. net share from a command prompt
B. Devices and Printers from Control Panel
C. Set-PrintConfiguration from Windows PowerShell
D. Set-Printer from Windows PowerShell
E. Printers & scanners from the Settings app
Answer: B,D
You have a laptop that has a high resolution display.
The Change the size of the text, apps, and other items setting is set to 175%.
You install a desktop application name App1.
When you start App1, the visual elements are misaligned, and the application interface does not appear as expected.
You need to ensure that App1 is displayed properly without affecting how other applications are displayed.
What should you do?
A. Create an AppX package for App1.
B. Run App1 as an administrator.
C. Modify the Compatibility settings of App1.
D. Configure an AppLocker rule for App1.
Answer: A
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Your network contains a single Active Directory domain named adatum.com.
The network contains five servers configured as shown in the following table:
All of the servers run Windows Server 2012 R2.
Test_Server has a shared folder named ShareA. Only local users have permissions to ShareA.
The network contains a mainframe computer that is administered by using the Telnet protocol.
The domain contains four client computers configured as shown in the following table:
All of the client computers run the 64-bit version of Windows. User3 frequently accesses ShareA. Remote Desktop is enabled on Computer4.
Your company identifies the following requirements:
You need to meet the Credential Guard requirement of Computer2.
Which two Windows features should you install? Each correct answer presents part of the solution.
A. Windows Process Activation Service (WAS)
B. Embedded BootExperience
C. Isolated User Mode
D. Windows Identity Foundation 3.5
E. Hyper-V Hypervisor
Answer: C,E
Note: This question is part of a series of questions that use the same set of answer choices. Each answer choice may be used once, more than once, or not at all.
Your network contains a single Active Directory domain. The domain contains a VPN server that supports all of the VPN protocols.
A user named User1 works from home and has a desktop computer that runs Windows 10 Pro. User1 has an application named App1 that requires access to a server on the corporate network. User1 creates a VPN connection on the computer.
You need to ensure that when User1 opens App1, App1 can access the required data.
What should you do?
A. Click Turn on password protected sharing.
B. Disable Network Discovery.
C. Modify the Profile settings of an incoming firewall rule.
D. Run the Add-VpnConnectionTriggerApplication cmdlet.
E. Run the New-NetFirewallRule cmdlet and specify the- Direction Outbound parameter.
F. Run the New-VpnConnection cmdlet.
G. Run the Set-NetConnectionProfile cmdlet.
H. Run the Set-VPNConnection cmdlet.
Answer: D
In this section, you will see one or more sets of questions with the same scenario and problem. Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals. Any of the solutions might solve the problem. It is also possible that none of the solutions solve the problem.
Once you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains a single Active Directory domain named contoso.com. The domain contains two computers named Computer1 and Computer2.
A user named User1 is a member of the local Administrators group on Computer1 and Computer2.
User1 fails to access the Event Viewer logs on Computer2 from Computer1. User1 can connect to Computer2 remotely by using Computer Management.
You need to ensure that User1 can use Event Viewer on Computer1 to remotely view the Event Viewer logs on Computer2.
Solution: You start the Remote Registry services on Computer2.
Does this meet the goal?
A. Yes
B. No
Answer: B
A user has a computer that runs Windows 10.
The user reports that it takes a very long time to start the computer.
You need to identify which user applications cause the greatest delays when starting the computer.
Which tool should you use?
A. Performance Monitor
B. System Configuration
C. Resource Monitor
D. Task Manager
Answer: D
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Your network contains a single Active Directory domain named adatum.com.
The network contains five servers configured as shown in the following table:
All of the servers run Windows Server 2012 R2.
Test_Server has a shared folder named ShareA. Only local users have permissions to ShareA.
The network contains a mainframe computer that is administered by using the Telnet protocol.
The domain contains four client computers configured as shown in the following table:
All of the client computers run the 64-bit version of Windows. User3 frequently accesses ShareA. Remote Desktop is enabled on Computer4.
Your company identifies the following requirements:
You need to configure Computer3 to meet the UAC requirement.
What should you use?
A. User Account Control Settings
B. Credential Manager
C. Security Options in the Computer Configuration of the Local Computer Policy.
D. Security Settings in the User Computer of the Local Computer Policy.
Answer: C
You purchase licenses for several apps from the Windows Store and you list the apps in your Windows Store for Business.
You need to tell users how to install the apps.
What should you instruct the users to use?
A. the Windows Store app and a Microsoft account
B. a web browser and a Microsoft Azure Active Directory (Azure AD) account
C. the Windows Store app and a Microsoft Azure Active Directory (Azure AD) account
D. a web browser and a Microsoft account
Answer: C
Every download and install for the 70-698 Installing and Configuring Windows 10 dumps|Passcert is loaded with time saving questions and answers exactly like you will see on the Microsoft 70-698 test. The fact is, each Passcert 70-698 Installing and Configuring Windows 10 dumps|Passcert is guaranteed to give you the advantage you require to reply to any Microsoft 70-698 Installing and Configuring Windows 10 dumps|Passcert with confidence and ease. Additionally, we will offer you our guarantee which our 70-698 Installing and Configuring Windows 10 dumps|Passcert will ensure your success with actual 70-698 answers.
Because Passcert can provide to you the highest quality Microsoft 70-698 Exam will take you into the exam step by step. Passcert guarantee that 70-698 Installing and Configuring Windows 10 dumps|Passcert can help you to pass the exam successfully.Passcert can not only save you valuable time, but also make you feel at ease to participate in the exam and pass it successfully. Passcert has good reliability and a high reputation in the IT professionals.
70-698 Installing and Configuring Windows 10 dumps|Passcert
