In order to pass the Cisco 300-180 exam, selecting the appropriate
training tools is very necessary. And the CCNP Data Center DCIT 300-180
dumpsis a very important part. CertTree can provide valid materials to
pass the Cisco 300-180 exam. The IT experts in CertTree are all have
strength aned experience. Their CCNP Data Center DCIT 300-180 dumps are
very similar with the real exam questions. CertTree is a site that
provide the exam materials to the people who want to take the exam.
Share some CCNP Data Center 300-180 exam questions and answers below.
The Core File Exporter automatically exports cores to a remote server as they are generated.
Which protocol does it use for this action?
A. FTP
B. SCP
C. SFTP
D. TFTP
Answer: D
Which
four tech support files can you create with the Cisco UCS Manager that
you can submit to Cisco TAC for support? (Choose four.)
A. UCSM
B. disk LUNs
C. fabric extender
D. memory
E. rack server
F. chassis
G. server cache
Answer: A, C, E, F
You
are installing Microsoft Windows Server 2008 R2 on a Cisco UCS C210 M2
server, and the installer does not see local storage on the LSI MegaRAID
SAS 9260-4i controller that is installed.
Which statement explains the issue?
A. The driver is not included in the installer DVD. Press F6 to load the LSI RAID driver from CD or virtual media.
B. The virtual disk is not created and online.
C. The LSI 9260-4i is only supported by Red Hat Enterprise Linux and VMware vSphere 4.0 and later.
D. The installer DVD for Microsoft Windows Server 2008 R2 did not include the LSI driver until SP2.
Answer: B
Which CLI command will indicate whether a Cisco UCS C-Series rack-mount server has any failed DIMMs?
A. ucs-c250 / # scope chassis
ucs-c250 /chassis # show dimm-summary
B. ucs-c250 / # scope chassis
ucs-c250 /chassis # show dimm-fault
C. ucs-c250 / # scope chassis
ucs-c250 /chassis # show dimm-ecc
D. ucs-c250 / # scope chassis
ucs-c250 /chassis # show dimm-recovery
Answer: A
Which of these is a supported Cisco C-Series integration topology?
A)
B)
C)
D)
Exhibit A
Exhibit B
Exhibit C
Exhibit D
Answer: B
During a password recovery of a Cisco UCS system in a cluster configuration, what happens to blade traffic?
A. There is no interruption to traffic, as the fabrics go down one at a time.
B. Traffic stops flowing until the process is complete.
C. There is no interruption to traffic because both fabrics stay up the whole time.
D. Traffic will continue to flow, but at a limited rate until the process is complete.
Answer: B
You
successfully install VMware ESXi 5.0 U1 on a Cisco UCS B200 M3 server
to a Fibre Channel LUN. When you reboot the server, you see the message
"Reboot and Select Proper Boot device or insert Boot Media in selected
Boot device and press a key."
What are the first two pieces of information you should gather to troubleshoot the boot failure? (Choose two.)
A. Connect to the NX-OS shell via the CLI and run the show npv flogi-table command.
B. SSH to the MDS 9124 and run the show flogi database command.
C. Validate the boot target WWPN and LUN ID in the service profile.
D. Validate the correct source WWPN in the service profile vHBA definition.
E. Validate zoning for your WWPN on the Cisco MDS 9124.
F. Validate that the boot order indicates the vHBA as the first device.
G. Ensure LUN masking is correctly configured on the storage controller.
Answer: C, F
Which three are valid tech support bundles to collect in the local management shell? (Choose three.)
A. UCSM
B. UCSM-MGMT
C. Port-Channel
D. Adapter
E. SAN
F. FEX
Answer: A, B, F
The Cisco UCS Manager displays FSM information for which four of these? (Choose four.)
A. which FSM task is being executed
B. the current state of an FSM task
C. the status of the previous FSM task
D. any error codes returned while processing
E. all completed FSM tasks
F. multiple FSM tasks that completed over multiple tries
G. multiple FSM tasks that failed
Answer: A, B, C, D
A
customer is troubleshooting QoS in a Cisco UCS domain due to high
packet drops in the network. The customer has configured the vNIC and
associated QoS policy, and changed the MTU from 1000 to 1200. Packet
drops still exist.
What is the cause of this issue?
A. The MTU
specified here must be greater than the MTU specified in the associated
QoS system class. If this MTU value is less than the MTU value in the
QoS system class, packets may be dropped during data transmission.
B.
The MTU specified here must be equal to or less than the MTU specified
in the associated QoS system class. If this MTU value exceeds the MTU
value in the QoS system class, packets may be dropped during data
transmission.
C. The MTU specified here must be less than the MTU
specified in the associated QoS system policy. If this MTU value exceeds
the MTU value in the QoS system policy, packets may be not be dropped
during data transmission.
D. The MTU must be optimized and should be changed to fc with the CLI command set mtu fc.
Answer: B
In a Cisco UCS environment, what are the three power types in a power policy? (Choose three.)
A. backup
B. grid
C. redund
D. n-plus-1
E. non-redund
F. plus-1
Answer: B, D, E
UCS-A# scope eth-uplink
UCS-A /eth-uplink # scope fabric a
UCS-A /eth-uplink/fabric # scope interface 2 3
UCS-A /eth-uplink/fabric/interface # create mon-src Monitor23
UCS-A /eth-uplink/fabric/interface/mon-src* # set direction receive
UCS-A /eth-uplink/fabric/interface/mon-src* # commit-buffer
What does the command scope interface 2 3 in the above CLI command sequence do on a Cisco UCS blade server?
A. enters the interface command mode for the specified uplink port
B. enters the interface command mode for the specified Fabric A
C. enters the interface command mode for the specified Fabric B
D. enters slot 3 port 2 specified uplink port
Answer: A
Which command sequence in the Cisco UCS C-Series rack server CLI sends tech support data to a TFTP server?
A. ucs-c250 / # scope cimc
ucs-c250 /cimc # scope tech-support
ucs-c250 /cimc/tech-support # set path default.tar.gz
ucs-c250 /cimc/tech-support *# set tftp-ip 192.168.70.45
ucs-c250 /cimc/tech-support *# commit
B. ucs-c250 / # scope system
ucs-c250 /system # scope tech-support
ucs-c250 /system/tech-support # set path default.tar.gz
ucs-c250 /system/tech-support *# set tftp-ip 192.168.70.45
ucs-c250 /system/tech-support *# commit
C. ucs-c250 / # scope support
ucs-c250 /support # scope tech-support
ucs-c250 /support/tech-support # set path default.tar.gz
ucs-c250 /support/tech-support *# set tftp-ip 192.168.70.45
ucs-c250 /support/tech-support *# commit
D. ucs-c250 / # scope fault
ucs-c250 /fault # scope tech-support
ucs-c250 /fault/tech-support # set path default.tar.gz
ucs-c250 /fault/tech-support *# set tftp-ip 192.168.70.45
ucs-c250 /fault/tech-support *# commit
Answer: A
When
using the Cisco UCS Manager GUI to troubleshoot a suspected bad memory,
which logs contain data that are related to the faulty DIMM?
A. the System Event log and Faults log that are located under the Admin tab
B. the Events log and Faults log that are located under the Admin tab
C.
the System Event log that is located under the Server tab in the
Navigation panel and the Faults log that is located under the Admin tab
D. the System Event log that is located under the Equipment tab and the Faults log that is located under the Admin tab
Answer: D
Looking
at the Equipment > Chassis > Servers > Server X view from the
Cisco UCS Manager GUI, which tab would you select to identify the fabric
interconnect uplink associated with a given virtual circuit?
A. Paths
B. vNIC Paths
C. Virtual Circuit Paths
D. VIF Paths
Answer: D
CertTree is website that can take you access to the road of success. CertTree can provide the quickly passing CCNP Data Center DCIT 300-180 dumps
for you, which enable you to grasp the knowledge of the certification
exam within a short period of time, and pass Cisco certification 300-180
exam for only one-time.CertTree is a website that provide the
counseling courses for IT professionals to participate in Cisco certification 300-180 exam and help them get the Cisco 300-180 certification.
With many online resources for preparing the 300-180
exam, when you read the below information you will notice that CertTree
is your premier source for 300-180 exam preparation. Our CCNP Data
Center DCIT 300-180 dumps are enough to prepare you best for your coming
300-180 Certification Exam. CertTree guarantees that you will be easily
able to succeed in your 300-180 Certification Exam.
karen's public profile
Post a new article.
Sign in or create a new account to get started. 100% FREE.