If you use the CertTree Cisco CCDA 200-310 DESGN dumps-CertTree.com, you can reduce the time and economic costs of the exam. It can help you to pass the exam successfully. Before you decide to buy our Cisco CCDA 200-310 DESGN dumps-CertTree.com, you can download our free test questions, including the PDF version and the software version. If you need software versions please do not hesitate to obtain a copy from our customer service staff.

Share some CCDA 200-310 exam questions and answers below.
Which mode is used to exclusively look for unauthorized access points?
A. monitor mode
B. sniffer mode
C. rogue detector mode
D. local mode
Answer: C

Which two options should be used to achieve fast convergence in an OSPF network? (Choose two.)
A. Bidirectional Forwarding Detection
B. fast hellos
C. LSA retransmission interval
D. SPF throttle timers
E. LSA group pacing
Answer: A,B


What is the primary consideration when choosing a routed network design over a traditional campus network design?
A. Layer 3 service support at the network edge
B. the routing protocol choice: open (OSPF) or proprietary (EIGRP)
C. the routing abilities of the host devices
D. the need to control the broadcast domains within the campus core
Answer: A

Which three options are examples of network logical virtualization? (Choose three.)
A. virtual PortChannel
B. virtual machine
C. Virtual Device Context
D. Virtual Switching System
E. virtual device driver
Answer: A,C,D

Which option can use deep-packet examination to determine the specific nature of an attack?
A. network IPS
B. NetFlow collector
C. stateful firewall
D. syslog server
Answer: A

Which three Cisco technologies can you use to detect and mitigate threats? (Choose three.)
A. NetFlow
B. FWSM
C. ISE
D. VRRP
E. sFLOW
Answer: A,B,C

A company is implementing an Identity Management solution with these characteristics:
• existing AAA Server
• Cisco Catalyst switches
• minimal added investments
Which Cisco Trust and Identity Management solution would you recommend?
A. NAC Appliance
B. Cisco IBNS
C. CSM
D. Cisco Security MARS
Answer: B

OSPF will be used as the IGP within a campus network. Which two things should you consider before deployment? (Choose two.)
A. All areas need to connect back to area 0.
B. The OSPF process number on each router should match.
C. NSSA areas should be used when an area cannot connect directly to area 0.
D. Stub areas should be connected together using virtual links.
E. ECMP may cause undesired results depending on the environment.
Answer: A,E

Which three sources does a network designer use to collect information for characterizing an existing network? (Choose three.)
A. staff input
B. visual inventory
C. network audit
D. traffic analysis
E. server statistics
Answer: A,C,D

An organization needs a WAN Transport technology that meets these criteria:
• has a low initial cost
• provides low-to-medium BW
• has medium-to-high latency and jitter
Which technology should the organization use?
A. DSL
B. X.25
C. ISDN
D. wireless
E. analog modem
Answer: A

When considering the three VoIP design models - single site, centralized multisite, and distributed multisite - which question below would help to eliminate one of the options?
A. Will the switches be required to provide inline power?
B. Will users need to make offsite calls, beyond the enterprise?
C. Will users require applications such as voice mail and interactive voice response?
D. Are there users whose only enterprise access is via a QoS-enabled WAN?
Answer: D

Which statement is true concerning the data center distribution (aggregation) layer design?
A. With Layer 3 at the aggregation layer, the physical loops in the topology must still be managed by STP.
B. The boundary between Layer 2 and Layer 3 must reside in the multilayer switches, independent of any other devices.
C. A mix of both Layer 2 and Layer 3 access isthe most optimal.
D. In a small data center, the aggregation layer can connect directly to the campus core, exchanging IP routes and MAC address tables.
Answer: C

WAN backup over the Internet is often used to provide primary connection redundancy. Which is the most important consideration when passing corporate traffic over the public Internet?
A. security
B. static versus dynamic routing
C. bandwidth
D. QoS
E. latency
Answer: A

Which Cisco security mechanism has the attributes listed below?
• it is a sensor appliance
• it searches for potential attacks by capturing and analyzing traffic
• it is a "purpose-built device"
• it is installed passively
• it introduces no delay or overhead
A. IKE
B. PIX
C. HIPS
D. NIDS
E. HMAC
Answer: D

What is the benefit of VLSM?
A. reduces configuration complexity by using the same subnet mask length
B. reduces the routing table size by using automatic route summarization
C. reduces the routing table size by using manual route summarization
D. allows the subnet mask and classful routing updates to be advertised
E. secures the hosts on a subnet by using RFC 1918 addresses
Answer: C

Cisco CCDA 200-310 DESGN dumps-CertTree.com provide you the gateway to success in actual 200-310 Certification Exam.CertTree provides you with the real environment as these products are built by IT examiners so you experience the real exam features in our products. CertTree coverage and accuracy are both excellent. We guarantee that using our Cisco CCDA 200-310 DESGN dumps-CertTree.com will adequately prepare you for your 200-310 exam. There will be hundreds of IT professional who have enough experience in the required domain and looking ahead their career growth.


CertTree is website that can take you access to the road of success. CertTree can provide the quickly passing Cisco CCDA 200-310 DESGN dumps-CertTree.com for you, which enable you to grasp the knowledge of the certification exam within a short period of time, and pass Cisco certification 200-310 exam for only one-time.CertTree is a website that provide the counseling courses for IT professionals to participate in Cisco certification 200-310 exam and help them get the Cisco 200-310 certification.