Description (2000 characters max.)Modern plates are available in various colours, under which steel and aluminum are almost unrecognizable. It's not about appearance.Comparing the more significant figures for aluminum and steel would make the decision easier. High strength steel plate suppliers deal with all types of steel plating materials.Steel vs. aluminum

Since the plates are all the same size, the steel variant requires a greater assembly effort due to its greater weight. Still, it is also necessary for the construction of the undercarriage. On the other hand, steel is more stable than aluminum and, therefore, more resistant to loads such as wind gusts and snowfall.

Aluminum is corrosion-resistant, but steel is not. This means greater effort is required to protect the stainless steel sheet from oxidation. However, in relation to the service life, this tension is only significant when the risk of steel corrosion is particularly high, such as in agriculture or near the coast. Boiler steel plate’s suppliers make your life easy in industrial works.

Aluminum's low density makes it easy to shape and cut. As for steel, it saves labor time, especially when installing plates. The advantage of aluminium’s excellent machinability is irrelevant when it is only a matter of covering a large surface that does not require special conditioning.

Aluminum is primarily resistant to corrosion but straightforward.

Contact with other metals aluminiumcan also oxidize. Therefore, the aluminum plate is recommended only to be fixed with nickel-plated screws or stainless steel screws. Additionally, caps must be used to compensate for aluminum's higher coefficient of expansion and to avoid stress point hazards from mechanical bolts. On the other hand, conventional screws are sufficient for steel sheets.

The term recycling is different from recycling. Recycling means, for example, that a sheet used as a roof for 15 years is immediately reused for another roof. The good news, however, is that within the special area of plates, plates made of aluminum or steel have a very high recycling rate. Unfortunately, there are no statistical figures for this, as recycling usually occurs through unofficial channels. Stainless steel sheet suppliers offer affordable products at good quality.

The rest is the price. An aluminum plate is much more expensive than a steel plate. Therefore, in the case of a large area, it is necessary to include the reinforced substructure of the steel plate in the calculation. Under certain conditions, aluminum is the best choice for general calculations. Especially if every site also talks about aluminum. In livestock breeding or feeding facilities, animal waste produces ammonia fumes. Ammonia is a corrosive gas and causes steel to rust very quickly.

Back to the question: aluminum or steel?

Generally, a steel plate is the best choice, but this is not a general rule as there are many factors to consider. Aluminum's less favorable properties, such as recyclability, may be lost within a few years. The industry is working on it all the time. This also has a side effect on aluminum sheets because the higher the recycling rate, the lower the price.